DigiPlus stock

How to solve the problem of engine idling and DigiPlus stockpanting? The engine idling and panting problem, also known as "idling jitter" and "randle jump flash" and other symptoms, is one of the common faults in modern automobile engines. This kind of problem generally occurs in the faults of automobile air conditioners, electronic systems, oil road systems, oxygen sensors, throttle valves, etc. When problems occur, it may affect the driving safety and economy of the car. So, how should the problem of engine idling and panting be solved? Next, we will discuss this problem from three aspects: cause, maintenance and common solutions.There may be many reasons for the engine idling and panting problem, but the main reasons are as follows: 1. The problem of oil road. For example, the fuel supply is insufficient, there are impurities, carbon accumulation and other blockages inside the oil road, or the filter in the oil road is blocked, resulting in oil problems. This will make the fuel unable to inject normally, thus affecting the working quality of the engine. Two. Air problem. If the filter is blocked by dust or the air in the intake pipe is insufficient, it will cause the engine idling and panting problems in the vehicle. 3. Electronic problems. The failure of some sensors or controllers, such as airflow sensors, water temperature sensors, oxygen sensors, etc., will lead to abnormal changes in the combustion condition of the engine, and eventually the problem of idling jitter. Overhaul For the problem of engine idling and panting, the car owner needs to carry out a detailed overhaul in order to solve the problem in time.The specific maintenance methods are as follows: 1. Check whether the air filter is clean. If the filter in the filter is blocked, you can choose to clean or replace it; 2. Check whether the throttle valve is in a smooth state, and check whether the engine intake pipe and the air filter are reasonably matched. During the inspection process, you may as well remove the air flow meter to clean the fine dust, discharge the water temperature sensor, and carry out scientific diagnosis and maintenance of the oxygen sensor; 3. Check whether the ignition system is normal and whether the wiper system is normal. It is necessary to check whether the ignition coil is working accurately, and to check the good copper rod or copper coil to ensure that the wake-up module and joule capacitor can accurately conduct sparks. Common solutions Car owners can take the following common methods to solve the problem of engine idling and panting: 1. Change the fuel.In order to reduce sediment as much as possible, generally high-quality fuel can remove old sediment in the oil road, thus optimizing the nutrition of the fuel system. The higher the freshness of liquid fuel, the higher the high-quality fuel number, so it is more prone to quality problems. Two. Replace the ignition coil. High-quality coils can ensure that the ignition system can function normally at low ambient temperatures and allow the engine to operate normally at high speed and high fuel consumption. 3. Replace the filter. In order to ensure the normal operation of the engine, an effective filtration mechanism is essential. Avoid the threat of fine dust to the system and provide sufficient and stable filtration services for the engine. Four. Replace the air flow meter. The electronic flowmeter can monitor the air flow of the engine to ensure that the combustion mechanism is normal, so as to ensure the working quality of the engine in the idle state.In a word, the problem of engine idling and panting seriously affects the driving safety and economy of the car. For car owners, they must be overhauled and repaired in time. Only through a scientific solution can we ensure that the car remains in normal operation. In the future, car owners should pay attention to the prevention and maintenance of engine failures when using cars in daily life to ensure driving safety.

Contact Us
Phone：020-83484638