Hearthstone arena

List of contents of this article:

• 1, the USB flash drive starts! After reinstalling the system selection, the black screen starts after the loading is completed
• 2, What is the reason for the black screen of the USB flash drive and the solution?
• 3, Why is it black after using a USB flash drive as a boot disk?
• 4、 After installing the system, the system has been black screen and can't be turned on. What's wrong?
• 5,< A href='#u diskWhen reinstalling the system and entering pe, the screen is black, and the screen is black. Title=' When the u disk reinstalls the system and enters pe, the screen is black, and the screen is black when reinstalling the system. The screen is black when reinstalling the system and entering pe, the screen is black
• 6, hp uses a USB flash drive to enter the PE system directly black screen

the USB flash drive starts! Reloading systemAfter all selections, the black screen will start after the loading is completed

1. If a black screen or blue screen appears after reinstalling the system with Xiaobai, it is likely that the disk partition and the boot mode in the bios do not correspond. Check the disk partition and reinsert the USB boot disk into pe. Click the DG partition tool on the desktop to check whether the disk partition is mbr or gpt partition.

2. The system problem may be the loss of system files, or the hardware has changed, such as replacing the motherboard or graphics card, and the system cannot recognize it, resulting in a black screen. In this regard, you can repair and install it again. Of course, the best way is to reinstall the system.

3. This situation is mainly caused by the following reasons: poor compatibility of the system installation file or GHO file, or damage to the installation file.The function of the USB disk system is abnormal and disconnected during the installation process. It is recommended to use the following methods: First, make a boot USB flash drive.

4. Recently, I want to reinstall the computer system, so I tried to use the USB flash drive to boot into the PE system. However, when I plugged in the USB flash drive and pressed the power-on key, the word "Press any key to start" appeared on the screen. I pressed any key according to the prompts, and then the screen turned black and there was no response.

5. After reinstalling the system on the USB flash drive, a black screen appears when it starts up. There are many reasons. Try the following methods: What the virus does: The virus may delete the partition or start the file, restart and press the F8 key, enter the safe mode to check and kill the virus, and repair the missing system files. , maybe that's fine.

What is the reason for the black screen of the USB flash drive and the solution?

1. This phenomenon mainly occurs in two situations: if it occurs when restarting the computer after reinstalling the system; leaving the USB flash drive on the computer, it is easy to turn on the computer again. The main reason is the setting of the boot order.

2. The computer has a black screen as soon as the USB flash drive is plugged in. There are two possibilities: the line of the USB flash drive interface is short-circuited or the USB flash drive is broken. The USB interface line of the computer is short-circuited. Solution: Try to replace a good USB flash drive and plug it in. If it is normal, it means that there is something wrong with the USB flash drive. If it is not normal, it means that there is a problem with the USB interface of the computer.

3. It may be because your computer has encountered some problems and it can't work properly. The following are some reasons that may cause the black screen of the computer: problems with the USB flash drive itself, such as file damage, virus infection, etc., cause the computer to be unable to correctly recognize and process the USB flash drive.

4. When you enter the boot interface, the screen will be black. It may be that there is something wrong with the PE tool. You can change the tool to remake the USB boot disk. It may be incomplete or damaged before.According to the editor's experience, some USB flash drives are also not suitable as boot disks, but there are very few. You can try another USB flash drive.

Why is it black after using a USB flash drive as a boot disk?

1. It is explained that the USB boot disk is made with bugs or incompatibility. You can try it in the following ways: the USB boot disk has not undergone extensive hardware tests, and it is inevitable that there will be bugs or incompatibility problems. It will lead to the inability to be used normally. You can try to change some USB flash drives to start up, which may succeed.

2. The problem of the PE system version. Your PE should support the old machine and the new motherboard is incompatible with WIN10. You can download the latest PE and reinstall it.

3. This situation is mainly caused by the following reasons: poor compatibility of the system installation file or GHO file, or damage to the installation file. The function of the USB disk system is abnormal and disconnected during the installation process. It is recommended to use the following methods: First, make a boot USB flash drive.

4. Solution to the black screen of the pe in the USB disk installation system: Open the chassis, unplug the hard disk data cable, turn on, enter the USB disk to start, and quickly plug in the hard disk data cable when entering the PE interface. I once encountered a similar problem with you, and I solved it with this method.

5. This may be because the USB disk boot system file is too old and incompatible with the system motherboard. Reinstall the latest version of the USB disk startup system. If it is old, then start the USB disk. Make a new one. There may be something wrong with the card.

What's wrong with the system that the system has been black screen and cannot be turned on after the system is installed on the u disk

1. The data in the main boot area is destroyed. When the content of the main boot area is destroyed by a virus or tampered with by other programs, it will lead The fatal machine can't be turned on.

2. This situation is mainly caused by the following reasons: poor compatibility of the system installation file or GHO file, or damage to the installation file. The function of the USB disk system is abnormal and disconnected during the installation process. It is recommended to use the following methods: First, make a boot USB flash drive.

3. Generally, the screen is black after reinstalling the system. It is possible that the disk partition and bios boot mode do not correspond, or the system is not installed successfully. Solution:Reinsert the USB boot disk into pe, click the DG partition tool on the desktop, and check whether the disk partition is mbr or gpt partition.

4. The compatibility of the system installation file or GHO file is poor, or the installation file is damaged. The function of the USB disk system is abnormal and disconnected during the installation process. It is recommended to use the following methods: First, make a boot USB flash drive. Take Xiaobai's one-click reinstall USB disk system as an example. There are also System Home USB flash drive system and so on.

5. I found some solutions on the Internet, some of which some people said that it might be a problem with the BIOS setting, so I went into the BIOS to check and confirmed that the USB disk boot option had been set to the first boot item. However, even if the USB disk boot item is changed to the first item, it still cannot enter the PE system, and the screen is still dark.

The USB disk reinstalls the system and the screen is black when it enters the pe

The system problem may be that the system file is lost, or the hardware has changed, such as replacing the motherboard or The graphics card cannot be recognized by the system, resulting in a black screen. In this regard, you can repair and install it again. Of course, the best way is to reinstall the system.

The reason why the USB disk boot disk enters the PE black screen: system problems may be the loss of system files, or the hardware has changed, such as replacing the motherboard or graphics card, and the system cannot recognize it, resulting in a black screen. In this regard, you can repair and install it again. Of course, the best way is to reinstall the system.

The reason why the USB boot disk enters the PE black screen: The system problem may be that the system file is lost or the hardware has been changed. For example, if the motherboard or graphics card is replaced, the system will not be able to recognize it, resulting in a black screen. In this regard, of course, you can perform the repair installation again or reinstall the system.

hp uses the USB disk to enter the PE system and the black screen directly

1. The reason why the USB disk boot disk enters the PE black screen: system problems may be the system file is lost, or the hardware has changed, such as replacement The motherboard or graphics card, the system cannot recognize it, resulting in a black screen. In this regard, you can repair and install it again. Of course, the best way is to reinstall the system.

2. It's hardThere is a problem with the main boot of the disk. Rebuilding the main boot record can solve the problem. The steps are as follows: (MSI motherboard as an example) Press the USB flash drive quick boot key F11 and select USB boot. After entering, move the cursor to the option of "[02] Run Lao Maotao Win8PE Toolbox (installation recommendation)" and press Enter to confirm.

3. The reason why the USB boot disk enters the PE black screen: the system problem may be that the system file is lost or the hardware has been changed. For example, if the motherboard or graphics card is replaced, the system will not be able to recognize it, resulting in a black screen. In this regard, of course, you can perform the repair installation again or reinstall the system.