UEFA TV

List of the catalog of this article:

• 1, Motorcycle 4 valves and
• 2、What are cylinder and valve?What does it mean picture
• 3, What will happen if the engine valve is broken? Symptoms of engine valve failure
• 4 , What will be the consequences of oil leakage of the valve chamber cover?
• 5、 What is a car valve chamber cover?

motorcycle 4 valves and

The differences between motorcycle engine two valves and four valves include different compression ratios, different performance and different thermal efficiency.

The difference between two valves and four valves of motorcycles lies in the number of valves and the valve control method. The valve of the motorcycle is the channel that controls the in and out of the cylinder, which affects the flow of gas in the combustion chamber. TwoThe valve engine usually has only one intake valve and one exhaust valve, while the four-elube engine has two intake valves and two exhaust valves.

According to Tencent.com, the difference between two-balve and four-eve motorcycles: from the principle of internal combustion engine, 4 valves are good at high-speed areas, while 2 valves are better at low-speed areas.

The compression ratio is different: If the single-cylinder engine of the same displacement of the motorcycle adopts a double overhead camshaft, the design of the four-valve will increase the air intake, improve the engine compression ratio, and accelerate the exhaust gas discharge speed, so as to achieve the purpose of improving the engine compression ratio.

What do cylinder and valve mean picture

Cylinder and valve are very important parts in automobile engines. EveryA gasoline or diesel engine needs at least one cylinder to accommodate the piston, in which gasoline burns energy to push the piston to work and generate power. The valve controls the inlet and out of air and fuel in the cylinder to ensure the normal operation of the internal combustion engine.

The worker converts thermal energy into mechanical energy through expansion in the engine cylinder; the gas is compressed by the piston in the compressor cylinder to increase the pressure. The housings of turbines, rotary piston engines, etc. are usually also called "cylinders". The valve is an important part of the engine.

The so-called intake control or exhaust control refers to the direction of the one-way throttle valve connected to the air intake of the cylinder. Generally, the exhaust throttle is used to control the dual-acting cylinder, that is, to control the airflow in the outlet direction of the cylinder, which is conducive to controlling the stability and linearity of the cylinder speed, and it is not easy to crawl.

What will happen if the engine valve is broken? Symptoms of engine valve failure

Engine valve failure The symptoms are as follows: it will affect the work efficiency of the engine and reduce the power of the car; there will be abnormal noise, the engine will have unstable idling or slow acceleration during operation, and the overtaking performance will also be reduced.

The symptoms of engine valve damage are: the car will make a sttling sound; the car will idle at unstable speed, the acceleration will not be smooth, and the car will be weak; it will cause the car to be loosely sealed and air leakage. The function of the engine valve is to input fuel into the engine and discharge exhaust gas.

The performance of engine valve damage is as follows: because the engine oil enters the cylinder along the valve duct, the spark plug accumulates carbon and oil stains. The working condition is not good, it can't work, and the engine power is reduced. The valve tilt cylinder is not tightly sealed, the cylinder pressure drops, and the engine power is weakened. The engine oil consumption is accelerating.

What will be the consequences of oil leakage of the valve chamber cover?

[Pacific Automobile Network] The oil leaking from the valve chamber cover will cause insufficient lubrication of the valve chamber, which will cause wear of the machine parts and damage the engine for a long time.It affects the airtightness of the engine, and the oil leakage will also leak the working pressure of the engine, and the air leakage will affect the stability of the engine.

The impact is as follows: The engine valve chamber cover pad is a rubber pad, which is to seal and prevent gasoline leakage. When the engine is running, the temperature is very high, and the oil leakage will slowly evaporate on the surface of the fuselage to produce pungent smoke. The serious oil leakage of the valve chamber cover will lead to a decrease in engine oil, which will affect lubrication.

affects aging and causes poor sealing; the crankcase forces the ventilation valve to be blocked, affecting the pressure of the crankcase to rise, and the pressure is released from the valve chamber cover or other weak places, resulting in oil leakage; more than 90% of the oil leakage of the vehicle valve chamber cover is caused by the corrosion and aging of the oil seal. The leaked oil enters the spark plug, so there is organic oil in the spark plug.

The consequence of oil leakage into the valve chamber is that the oil accumulates on the valve putter on the camshaft and turns it into oil sludge, which will form carbon over time. The amount of oil is reduced rapidly; as the name implies, the oil leakage of the valve chamber cover is to lose oil, so the oil loss will be much more than normal.

The oil leakage of the valve chamber cover gasket has a great impact on the car and needs to be anti-skid. The oil leakage of the valve chamber cover gasket has a great impact on the car and needs to be anti-skid. The end of the valve is connected to the camshaft through the strut or rod; the movement of the valve is controlled by the camshaft, and the camshaft of modern engines is more placed above the cylinder head.

What is a car valve chamber cover?

The cover on the engine is called the valve chamber cover. The valve chamber cover is a kind ofThe plastic valve chamber cover has the advantages of weight reduction, vibration reduction and noise reduction, low cost and can meet complex structural design. The product is mainly used in the automotive field.

The correct selection of the valve chamber cover. The engine valve chamber cover is referred to as the valve chamber cover, which is the sealing component of the top part of the engine. It seals the engine lubricating oil corresponding to the oil span, so that the lubricating oil will not leak out when the engine is running.

[Pacific Automobile Network] The cover on the engine is called the valve chamber cover. The valve chamber cover is a kind of plastic valve chamber cover with the advantages of weight reduction, vibration damping and noise reduction, low cost and can meet complex structural design. This product is keyly used in the automotive field.