Bingo Plus stock

List of the contents of this article:

• 1,Bingo Plus stock How to reinstall the OSX system on the Windows system
• 2, How to install OSX10.11 on Windows10 system computer [Picture and Text Tutorial]
• 3, Make osx to start the USB disk and use the usb disk to install the whole process of the mac system graphic and text steps
• 4, VMWare11 virtual machine How to install OSX10.9 system
• 5, Install a new Mac with a USB flash drive.OS.X.10.6.3 Retail help

How to reinstall the OSX system on the Windows system

1. Motherboard: BIOS turns on AHCI, it's better to Before installing Lion, do a good job of driving the AHCI function of the motherboard, because some computers can't enter the original system after the AHCI function is still activated. If you really can't enter, don't be afraid. Just enter the BIOS and change back to IDE.

2. First, use UltraISO to convert TLF-SOFT-Apple.Mac.OSX.vLion-iND.dmg to TLF-SOFT-Apple.Mac.OSX.vLion-iND.isz format. Then use UltraISO to make TLF-SOFT-Apple.Mac.OSX.vLion-iND.isz to the USB flash drive.

3. There are 2 ways to install the Apple system on the computer. First, install the dual system directly in the Windows system. Or you can adopt the second method: install a virtual machine VMware in Windows.

4. Make a boot USB flash drive: Go to the physical store to buy a 4-8G USB flash drive (you can ask the boss to help make a system USB flash drive to omit the following steps), search and download the installer's USB flash drive startup PE production tool on the Internet, insert the USB flash drive into the computer to run this software to make it into a startup USB disk.

5, or command+R, or direct option). Wait for the little earth to enter the network recovery. THE PROGRESS BAR IS FULL, AND THE DISK (INCLUDING YOUR WIN7 DISK) IS DIRECTLY ERASED. Just use the default when erasing the disk (that is, the OSX extended log). Then choose to install OSX online. Then just wait. The installation is completed and it is a brand-new OSX system.

How to install OSX10.11 on Windows 10 system computer [Picture and text tutorial]

1. Recommendation: win1032-bit simplified version The download details are as follows: First, install VMwareWorkstation12Pro, and the link will be sent later. The installation method is very simple.Next, please download the Apple system cracking patch, otherwise there will be no option for the Apple system. The link is at the back.

2. Download MACOSX2BaseSystem.dmg, insert 96G into the USB flash drive, and format it as an Apple file system (MacExtendedJournal extended log system).

3. First, download and install vmware workstation12, and don't be busy running the software. 2 Download the unzip unlocker208 file, find it and click to run win-install.cmd.

Make osx to start the USB disk and use the usb disk to install the whole process of graphic and text steps of the mac system

Required tools: more than 8G USB disk appstore download osx system mirror normally used mac computer make maxos The steps to start the USB flash drive are as follows: the OSXLion just downloaded from the appstore will be placed in the Dock at the bottom of the screen.

need to be re-When installing the system, plug in the made Apple system USB flash drive, and press option to select the USB flash drive to start.

After inserting the boot USB disk, press the option key for the boot time. Enter the startup item interface. Select the yellow hard disk icon, Mac OS X, and click the up arrow to enter the next step. Select the language that needs to use the operating system and click the arrow to the right. Select Disk Utility. The following step is to completely erase the data in the previous hard disk.

After the startup USB disk is completed, the disk symbol of the USB disk has changed from the original "1" to "Mac OS X Install ESD". Next, you can use this USB flash drive to start and install the Lion system. Insert the USB flash drive to start up, long press the "option" key to enter the boot interface, and select the yellow "Mac OS X" to boot the system for installation.

Step two, put the downloaded Apple computer Mac OS X operating system into the hard disk partition just created by the mobile hard disk (or USB flash drive).

How to install OSX10.9 system in VMWare11 virtual machine

Create virtual machine. Click "Create a new virtual machine" in the picture. Select Custom Installation, and then the next step. Select to install the operating system later, and the next step is until the interface shown in the figure below.

Download all kinds of raw materials, please Baidu by yourself. Needless to say, VMware10 installation is a normal software installation. Unlock the patch and enter the corresponding folder. Right-click to run it with administrator permissions. For example, at present in WThe VMware installed on the indows system, enter the windows folder and click install. Create a new virtual machine, and the default is classic.

First, in vmware, click New Virtual Machine, select the standard configuration type and click Next. Here, if there is an installation disk, you can choose the installation disk to install. If not, you can download the iso system image on the Internet for installation.

Access the system preferences, enter the "Extension" function, and check the unused components.

First of all, let's download the VMware 10 virtual machine Chinese software on the Internet. Let's take a look and click to create a virtual machine. Normally, we install a virtual machine, which is typical, because she is recommended. We choose custom (advanced) for the Apple system.

Install Mac.OS.X.10.6.3 with a new USB flash drive. Retail help

When we turn on the computer, press and hold command+R on the keyboard at the same time, and then the "OS X Utility" window will appear as shown in the figure. Click "Reinstall macOS" in the window, and then follow the prompts.

Step 3: Create a bootable USB flash drive Download and install the macOS installer, which is an official tool for creating a bootable USB flash drive. After opening it, select the version of the Mac operating system you want to install, and then click "Continue". Select your USB flash drive as the target disk, and then click "Continue".

First of all, use the "Disk Utility" (Finder--Application--Utilities--Disk Utility) that comes with the Mac OS X system of the Apple computer to partition the mobile hard disk.

First of all, prepare a USB flash drive of more than 8G, and an installation CD of Mac OS. If you don't have a CD, you can also use a mirror file. Enter Mac OS, open Disk Utility, and format the USB flash drive into a Mac OS extended format. Then select "Restore".

Question 1: How to reinstall the Mac system on an Apple computer? There are two installation methods for Mac OS X system: insert an original mirror installation CD of the Mac OS X system, a USB flash drive, a mobile hard disk (any of the three storage media is fine), and press the Option key when starting up. Select the USB flash drive to start the installation.