Casino Plus

List of contents of this article:

• 1,Casino Plus How to deal with the transmission system warning light on
• 2, How to deal with the pe warning when the USB disk boot disk installation system enters?
• 3, The car must stop when these eight lights are on

How to deal with the warning light of the transmission system

Replace the clutch.The warning light of the transmission system is a serious failure. When the warning light of the transmission system lights up while the vehicle is driving, it indicates that the transmission system is faulty. A large part of the reason is that the gearbox is overheated or damaged. So it is recommended not to continue driving.

If the above methods still can't solve the problem, you need to find a professional car repair shop for inspection and repair. They can use professional equipment to detect the transmission system and solve the transmission system problems. In short, when the warning light of your vehicle transmission system is on, it needs to be dealt with in time to avoid bigger problems.

If the transmission system warning light is on during the driving process of the vehicle, it means that the transmission system is faulty, which is largely due to the overheating of the gearbox temperature or the damage to the gearbox; therefore, it is recommended not to continue driving.You should immediately pull over and ask for help in place under safe circumstances to avoid causing greater damage to the gearbox.

Introduction to the handling method of warning lights in automobile transmission system: There may be a problem with the gearbox. If your car is not out of warranty, it is recommended that you go to the 4s store to check and change it. The transmission system is generally composed of clutch, transmission, universal transmission, main reducer, differential and semi-shaft, etc.

The warning light of the transmission system is a relatively serious fault. If the warning light of the transmission system lights up during the driving process of the vehicle, it means that the transmission system is faulty.

How to deal with the pe warning when the USB disk boot disk installation system enters?

First of all, you need to check the PE of the USB flash drive, open the PE production tool, and insert the USB flash drive.Remake the PE boot USB disk. After making it, choose to use analog boot to confirm whether the PE system is normal.

After booting with PE disk, you can use disk utility to convert partition mode GPT to MBR, such as diskgenius partition assistant, and rewrite the boot area. Use the Xiaobai one-click reinstall tool to make a USB disk boot disk into pe.

This may be a problem of incompatibility with the pe environment. It is recommended that you use another tool to make a new pe and enter the system to reinstall. Here, I would like to introduce to you the tutorial of Xiaobai's one-click reinstall system tool to make pe reinstall system.

The eight lights of the car must be stopped

1. "Round exclamation mark" - brake system fault light: The fault indicator of the car brake system is on, indicating that the system may be faulty.The unreleased parking brake (i.e. the handbrake) should also be lit. The brake system is very important for driving safety. It must be checked and repaired, otherwise it is easy to be in danger.

2. Green/blue indicator light: Generally, it indicates the status of the vehicle function, indicating that the function is on or off. Yellow indicator light: generally indicates a reminder that there is a problem with a certain function or accessory of the vehicle, which needs the owner to pay attention to and handle the repair at the appropriate time.

3. "Aladdin Magic Lamp" -- Oil Alarm Light This indicator light that looks like Aladdin's Magic Lamp is the oil alarm light! If the light is on, it means that the oil stock and pressure are lower than the standard value. If you continue to drive, the engine will lose lubrication and cause serious wear.