DigiPlus stock

Replace the engine belt to keep your car running efficiently. The DigiPlus stockengine belt is an important part connecting the camshaft and crankshaft. It has the function of transmitting power and controlling engine gas distribution. However, with the increase of use time, the belt will have wear, aging, cracks and other problems, and may even break, which will bring great danger to the vehicle. Therefore, it is necessary to replace the engine belt regularly to ensure the normal operation and driving safety of the vehicle. This article will introduce the readers in detail the methods and precautions for replacing the engine belt. I. The method of replacing the engine belt 1. Some tools need to be prepared to replace the engine belt, including wrenches, screwdrivers, jacks, etc. Before replacing, you need to read the service manual of the vehicle to understand the correct time, method and precautions for replacing the engine belt.Two. Remove the old belt. Before replacing the engine belt, the safety belt should be removed first, the vehicle should be raised and the tires should be removed to facilitate the next work. Then, remove the bracket and fan, and remove the old belt. When removing the belt, be especially careful not to let the belt fall under the engine, so as not to cause subsequent problems. 3. When installing a new belt, first make sure that the size and shape of the new belt and the old belt are the same to ensure that there is no difference in the use effect. Then, fix the new belt on the crankshaft, and then press the belt and adjust it to the correct position according to the instructions in the vehicle service manual. Four. After testing and debugging and replacing the new belt, you need to reinstall the bracket and fan, and then lift the vehicle with a jack to ignite the vehicle engine to test whether it is normal. If it is normal, you can install the vehicle tires back to their original position, remove the jack and test the driving condition of the vehicle.II. Precautions for replacing the engine belt 1. Replacement time The replacement time of the engine belt depends on the specific situation of the vehicle. Generally speaking, it needs to be replaced every 40,000 to 60,000 miles or 5 to 7 years. However, if the belt is found to be worn, cracked, etc. during use, it needs to be replaced in time to ensure driving safety. Two. Choose the right belt. When replacing the engine belt, it is necessary to choose a belt that matches the vehicle model and size to prevent problems such as insufficient belt tension or loose connection. Therefore, before replacing, it is best to consult an experienced repairman to ensure that the right belt is selected. 3. Pay attention to protective measures. When replacing the engine belt, you need to pay attention to your own safety to avoid the belt falling under the engine, so as not to cause subsequent problems. At the same time, pay attention to wearing protective gloves, goggles and other equipment to protect your own safety.Four. After replacing the new belt for normal use, you need to pay attention to normal use to avoid problems such as shortening the service life of the belt and the failure of the belt due to improper driving. In a word, replacing the engine belt is crucial to the normal use and driving safety of the vehicle. Therefore, during the use of the vehicle, we need to regularly check the use of the engine belt and ensure that the conditions for replacement are met. When replacing, it is necessary to pay attention to the details of safety and normal usage to ensure the efficient operation and safety of the vehicle.

Contact Us
Phone：020-83484638